Chapter 8 Gate Barrier

The Gate Barrier is one of the most popular blow moulded barriers on the market. A high quality, cost effective solution, it meets the standards required for a Chapter 8 street works barrier. Barrier to barrier connection is quick and easy to use on uneven ground.

Each Chapter 8 Gate Barrier from SafeSite Facilities has a height of 1000mm, with a depth of 50mm and a width of 2000mm. It weighs 11.2kg and is MIRAS wind tested to 58mph.

Features

• Incredible strength and durability
• Free standing with 360° swivel feet
• Free from screws and rivets
• Multiple colours available
• Stacks in 50 mm (2 inch) with location (40 per pallet)
• Moulded in orange as standard, but can be coloured to suit
• Coloured feet if desired
• A moulded lamp connector
• Barrier to barrier connection is quick and easy to use on uneven ground
• Manufactured in High Density Polyethylene
• Company identification can be embossed

Standards

• Conforms to requirements of BSEN8442
• Reflectivity requirements of BSEN12899-1
• Chapter 8 – The Traffic Signs Manual
• The Red Book 2013
• Traffic Signs Regulations & General Directions

Installation

Free standing with 360º swivel feet, each barrier uses a hook and eye to connect to other barriers and is free from screws and rivets. The Gate Barrier can be pivoted at the connection pin to navigate tight corners, something that is very beneficial when creating pedestrian walkways or making small square compounds for minor street-works.

SafeSite Facilities’ Gate Barriers conforms to the requirements of BSEN8442 and the reflectivity requirements of BSEN12899-1 as well as Chapter 8 – The Traffic Signs Manual, The Red Book 2013 and Traffic Signs Regulations & General Directions.

Traffic Signs Manual Chapter 8

Buy or hire

All of our barriers are available to buy or hire, for temporary or permanent use. We can deliver and install anywhere in the UK. Contact us today for a free, no obligation quote.